keyboard_arrow_up
keyboard_arrow_down
Revision Femoral Stem TARGOS™
The titanium alloy TARGOS™ HAP revision femoral stem is intended for second-intention cementless implantation, indicated for simple loosening until massive destruction of the upper extremity of the femur.
Its 12/14 taper allows for a wide selection of femoral heads: short, medium or long necks, 22.2 or 28 mm diameter, in stainless steel or CoCr, 28 mm diameter in Ceralepine 28, 32 or 36 mm in Biolox Delta alumina.
A bioactive titanium-hydroxyapatite bilayer coating is applied using a vacuum plasma spray technique with an excellent industrial control.
If required, a long stem called "rescue" (300 mm) is available.
 |
Collar with HA coating, on the calcar for better control of the sinking and rotation of the stem as well as an exceptional distribution of stresses at the interface. |
|
 |
Design optimising metaphyseal filling but compatible with an intrafemoral approach, without putting the greater trochanter at risk. |
|
 |
Range adapted to various femoral anatomies and indications.
|
|
 |
Cemented revision stems complete the range : a mirror polished finish prevents any alteration of the cement mantle in case of micromovements. |
The titanium alloy TARGOS™ HAP revision femoral stem is intended for second-intention cementless implantation, indicated for simple loosening until massive destruction of the upper extremity of the femur.
Its 12/14 taper allows for a wide selection of femoral heads: short, medium or long necks, 22.2 or 28 mm diameter, in stainless steel or CoCr, 28 mm diameter in Ceralepine 28, 32 or 36 mm in Biolox Delta alumina.
A bioactive titanium-hydroxyapatite bilayer coating is applied using a vacuum plasma spray technique with an excellent industrial control.
If required, a long stem called "rescue" (300 mm) is available.